Products
  • Products
  • Content
    The product images shown are Illustrative only and may not be an exact representation of the product.

    Fuel Fill Hose

    4278 Fuel and Oil Hose for engine oil, fuel filler, and hydraulic suction applications. Also, suitable for tank vent and crank case vent. Not for fuel injection or air intake. 4663K Wire Reinforced Fuel and Oil Hose is for fuel or oil fill or cross-over hose applications where tight bends or vacuum is required.

    • 4278
    • Temperature: -40°C to +125°C (-40°F to +257°F)
    • Nitrile tube, synthetic knit reinforcement, modified nitrile cover
    • Meets SAE 30R6 or SAE 30R7*(*except oxidised petrol test)
    • Offered in bent formed configurations and straight
    • 4663K
    • Temperature: -40°C to +100°C (-40°F to +212°F)
    • Nitrile tube, synthetic fabric reinforcement w/2 embedded helical wires, neoprene coated fabric cover
    • Meets SAE 30R5 - Wall thickness is 4.47±1.42mm (0.176±0.056 inch) excluding embedded wire area.

    All Parts

    Part # Product # Description Maximum Working Pressure (psi) Maximum Working Pressure (bar) Inside Diameter (in) Inside Diameter (mm) Outside Diameter (in) Outside Diameter (mm)