Products
  • Products
  • Content

    WIRE BRAID HOSE, COUPLINGS AND ASSEMBLIES

    When you need high-performance flexibility, you need Gates wire braid hydraulic hoses, couplings and accessories. The one or two braid wire reinforcement technology gives this hose a high resistance to kinking, excellent tensile strength, and a tighter bend radius, ideal for high and medium pressure petroleum, water-based and general industrial fluid conveyance. If you need a custom cut hose length, private brand labelling, safety and application training, or resources for your hydraulic hose assembly, contact the Gates customer service team.

    The product images shown are Illustrative only and may not be an exact representation of the product.

    M4KL Wire Braid Hose: 280 Bar - High Temp +121°C

    Recommended for extremely low temperature high-pressure hydraulic oil line applications. Easy to route and to install in extremely tight areas. Exceeds SAE 100R19 and ISO11237 R19. Recommended Couplings: GlobalSpiral™ Couplings (-16), MegaCrimp® Couplings, Stainless Steel B Couplings (-4 through -8), Stainless Steel S Couplings (-12 and -16).

    • M4KL hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids.
    • Superior flex impulse performance: Tested to 600,000 impulse cycles, 3 times the industry standard.
    • Meets Flame Resistance Acceptance Designation MSHA 2G.

    All Parts

    Part # Product # Description

    Features and Benefits

    • Provides greater performance, flexibility, easier routing and plumbing of mobile and stationary hydraulic platforms in very low temperature environments.
    • M4KL has tighter minimum bend radius than SAE 100R19 with 4000 PSI constant working pressure for all ID's.
    • 70% of EN 857 2SC and 50% of EN 853 2SN bend radius at rated working pressure.
    • Alternative to spiral hoses in high pressure lines where flexibility is required.
    • Resistant to cover cracking at low temperature and tight bend radius.
    • Validated with MegaCrimp®.
    • Working pressure: 28 MPa.
    • Cover: MSHA approved.
    • Temperature Range:
        • -57°C to +100°C
        • -70°F to +212°F
    • Design factor: 4:1.
    • Size: 1/4" to 3/4".