Close
Products
  • Products
  • Content

    Products By

    0:00 / 0:00
    The product images shown are Illustrative only and may not be an exact representation of the product.

    Coal Power/Longwall Mine Hose - CPB Mine

    Recommended for high-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids. Two wire braid hose with static and dynamic pressure ratings listed on the hose. Couplings: MegaCrimp® Couplings (-4, -6, -8, -12, -16 and -20) GSP (-24 and -32).

    • Superior to SAE and ISO Specifications.
    • Dynamic working pressure per BCS174 means frequent pressure surges.
    • Qualification testing requires 100,000 impulse cycles at 133% of the dynamic working pressure.
    • Static working pressure means very little pressure surging.
    • BCS174 says that the internal hydraulic circuit of a roof support system represents an almost steady-state condition with little or no dynamic loading, and hoses consequently will tolerate higher ratings.
    • Determined by EN 853 2SN, it is the allowable working pressure under static load that approximates a 1:2.5 ratio to burst pressure.
    • This is based on the EN specification burst pressures and not the higher Gates minimum burst pressures.
      Mining Products Catalog

    All Parts

    Sort & Filter

    Close
    Close