Schließen
Products
  • Products
  • Content

    Products By

    The product images shown are Illustrative only and may not be an exact representation of the product.
    View All M4K-MTF Wire Braid Hose: 280 Bar - MegaTuff® Cover

    10M4K-MTFxRL67

    Produkt# # 4657-01481

    Recommended for high-pressure hydraulic oil line applications. Easy to route and to install in extremely tight areas. Exceeds ISO 18752 Grade B, SAE 100R19 and ISO11237 R19. Recommended Couplings: GlobalSpiral™ Couplings, MegaCrimp® Couplings, Stainless Steel B Couplings (-4 through -8), Stainless Steel S Couplings (-12 and -16).

    • M4K hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids.
    • Superior flex impulse performance: Tested to 600,000 impulse cycles, 3 times the industry standard.
    • Meets Flame Resistance Acceptance Designation MSHA 2G.

    Expand All / Collapse All
    • Product Details
      Part # 10M4K-MTFxRL67
      Product # 4657-01481
      Beschreibung: 10M4K-MTFxRL67
      UPC 072053435498
      Continuous Operating Temperature Range -40°F to +212°F
      Minimum Bend Radius (in) 3
      Minimum Bend Radius (mm) 76
      Min. Burst Pressure (psi) 16000
      Hose Inside Diameter (in) 0.625
      Hose Outside Diameter (in) 0.99
      Inside Diameter (in) 5/8
      Inside Diameter (mm) 16
      Temperature Range -40/100
      Outside Diameter (in) 0.99
      Outside Diameter (mm) 25.1
      Specifications Minimum Burst Pressure (Bar): 1120

    Features and Benefits

    • With the Gates special MegaTuff® cover which offers 300 times the abrasion resistance of the standard M4K cover as per ISO 6945, superior ozone and weathering resistance.
    • Provides greater performance, flexibility, easier routing and plumbing of mobile and stationary hydraulic platforms.
    • 50% of EN 857 2SC and 40% of EN 853 2SN bend radius at rated working pressure.
    • Alternative to spiral hoses in high pressure lines where flexibility is required.
    • Type approvals: DNV, GL, LR, BV and ABS.
    • Validated with MegaCrimp®.
    • Working pressure: 28 MPa.
    • Temperature Range:
        • -40°C to +100°C
        • -40°F to +212°F
    • Design factor: 4:1.
    • Size: 1/4" to 3/4".