0:00

0:00 / 0:00

The product images shown are Illustrative only and may not be an exact representation of the product.

70096 20C5CXCTN

Product # 36581758

Recommended for medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: intended for heavy duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications. Not recommended for gasoline or diesel fuel.

Recommended Couplings: C5 Field Attachable Couplings, C5X Field Attachable Couplings (-5, -8 and -12), MegaCrimp® Couplings (Depending on Size), GlobalSpiral™ Couplings (Depending on Size).
DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12).
Please see Gates eCrimp for correct fitting recommendation.

Hydraulics Catalog

Specifications
Features

Specifications

Product Details

Part #	70096 / 20C5CXCTN
Product #	36581758
Description	70096 20C5CXCTN
UPC	072053226249
Continuous Operating Temperature Range	-40°F to +212°F
Minimum Bend Radius (in)	9
Min. Burst Pressure (psi)	2500
Hose Inside Diameter (in)	1.125
Hose Outside Diameter (in)	1.5
Temperature Range	Under SAE 100R5 (hydraulic) conditions -40°F to +212°F (-40°C to +100°C). All-purpose fleet application (hot lube oil lines) -40°F to +300°F (-40°C to +149°C). Air to +160°F (+71°C) only. Avoid continuous use at maximum temperature concurrent with maximum working pressures. For water emulsions see Temperature Limits Table.

Application

Coupling Recommendation	(See Crimp Data Manual 428-7365 or E-Crimp), C5 Field Attachable Couplings (-4 through -32) (G34) Section K, C5X Field Attachable Couplings (-5, -8, and -12) (G34) Section K
Use	Fleet

Construction

Cover	Black, oil and mildew resistant, polyester braid.
Reinforcement	One braid of high-tensile carbon steel wire over one braid of polyester.
Tube	-4 and -5: black, oil and heat-resistant synthetic rubber (Neoprene - Type A); -6 through -40: (Nitrile - Type C). See Hose Stock Characteristics.

International Standards

Standard Industry Specification	SAE 100R5, SAE J1402 All
Meets These Agency Specifications	DOT - Department of Transportation; USA, FMVSS - Federal Motor Vehicle Safety Std. USA, RCCC - Regular Common Carrier Conf Fleet Truck/Bus; USA, SAE - Society of Automotive Engineers

Notes

Notes	DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12).
Recommended For	Medium-pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications, DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12). Not recommended for gasoline or diesel fuel.

DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12).

Recommended For

Medium-pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications, DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12). Not recommended for gasoline or diesel fuel.

Packaging details

Customer Pack	100
Weight (lbs.)	0.54
Packaging	A

Features

Features and Benefits

Avoid continuous use at maximum temperature concurrent with maximum working pressures.
For water emulsions see Temperature Limits Table.
Temperature Range:

- Under SAE 100R5 (hydraulic) conditions:
  - -40°C to +100°C
  - -40°F to +212°F

- All-purpose fleet application (hot lube oil lines):
  - -40°C to +149°C
  - -40°F to +300°F

- Air only:
  - +71°C
  - +160°F

70096 20C5CXCTN

Features and Benefits

Connect With Us

CHOOSE YOUR REGION OR LANGUAGE