Recommended for medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: intended for heavy duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications. Not recommended for gasoline or diesel fuel.
Part # | 70591 / 6C5CXREEL |
---|---|
Product # | 36581777 |
Description | 70591 6C5CXREEL |
UPC | 072053227895 |
Continuous Operating Temperature Range | -40°F to +212°F |
Minimum Bend Radius (in) | 4 |
Min. Burst Pressure (psi) | 9000 |
Hose Inside Diameter (in) | 0.3125 |
Hose Outside Diameter (in) | 0.67 |
Temperature Range | Under SAE 100R5 (hydraulic) conditions -40°F to +212°F (-40°C to +100°C). All-purpose fleet application (hot lube oil lines) -40°F to +300°F (-40°C to +149°C). Air to +160°F (+71°C) only. Avoid continuous use at maximum temperature concurrent with maximum working pressures. For water emulsions see Temperature Limits Table. |
Coupling Recommendation | (See Crimp Data Manual 428-7365 or E-Crimp), C5 Field Attachable Couplings (-4 through -32) (G34) Section K, C5X Field Attachable Couplings (-5, -8, and -12) (G34) Section K |
---|---|
Use | Fleet |
Cover | Black, oil and mildew resistant, polyester braid. |
---|---|
Reinforcement | One braid of high-tensile carbon steel wire over one braid of polyester. |
Tube | -4 and -5: black, oil and heat-resistant synthetic rubber (Neoprene - Type A); -6 through -40: (Nitrile - Type C). See Hose Stock Characteristics. |
Standard Industry Specification | SAE 100R5, SAE J1402 All |
---|---|
Meets These Agency Specifications | DOT - Department of Transportation; USA, FMVSS - Federal Motor Vehicle Safety Std. USA, RCCC - Regular Common Carrier Conf Fleet Truck/Bus; USA, SAE - Society of Automotive Engineers |
Notes | DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12). |
---|---|
Recommended For | Medium-pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications, DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12). Not recommended for gasoline or diesel fuel. |
Customer Pack | 385 |
---|---|
Weight (lbs.) | 0.24 |
Packaging | E |