The product images shown are Illustrative only and may not be an exact representation of the product.

1X125FT FUEL MASTER LP350

Product # 32201212

Gates LP350 is designed to convey propane, butane, or a combination of the two. Consumer applications include gas grills, heaters, torches, and other outdoor equipment. It can also be used as an industrial transfer hose and for natural gas under certain conditions.

Hydraulics Catalog

Specifications

Specifications

Product Details

Part #	1X125LP350X / 1X125FT FUEL MASTER LP350
Product #	32201212
Description	1X125FT FUEL MASTER LP350
UPC	770075250739
Vacuum (In. Hg)	15
Continuous Operating Temperature Range	-40°F to +180°F
Minimum Bend Radius (in)	8
Min. Burst Pressure (psi)	1750
Hose Inside Diameter (in)	1
Hose Inside Diameter (mm)	25.4
Hose Outside Diameter (in)	1.51
Hose Outside Diameter (mm)	38.4
Temperature Range	-40°F to +180°F (-40°C to +82°C) continuous service. Warning: Do not convey LP Gas over +140°F (60°C).

Application

Coupling Recommendation	Power Crimp® Couplings (3/4", 1 1/2" and 2" I.D.) Section I, GLX® Couplings (1/4" to 1 1/4") (G44) Section L
Use	Industrial Hose

Construction

Color	Black
Construction: Cover	Type A (Chloroprene). Black. All sizes are perforated.
Construction: Design Factor	5:1
Construction: Reinforcement	Braided, synthetic high tensile cord. 1 1/4" - 3". High tensile synthetic textile cord. 1/4" - 1".
Construction: Tube	Type A (Chloroprene). Black. 1 1/2" - 3". Type C (Nitrile). Black. 1/4" - 1 1/4".

International Standards

Standards CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes).

Standards	CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes).

Notes

Recommended For	Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit).
Caution	Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information.
Couplings Note	Select Ind Hose Coupling Reference Sheet link below for additional information.

Packaging details

Customer Pack	125
Weight (lbs.)	0.6

1X125FT FUEL MASTER LP350

Connect With Us

CHOOSE YOUR REGION OR LANGUAGE