Products
  • Products
  • Content

    WIRE BRAID HOSE AND COUPLINGS

    When you need high-performance flexibility, you need Gates wire braid hydraulic hoses, couplings, and accessories. The one or two braid wire reinforcement technology gives this hose a high resistance to kinking, excellent tensile strength, and a tighter bend radius, ideal for high and medium pressure petroleum, water-based, and general industrial fluid conveyance. If you need a custom cut hose length, private brand labeling, safety and application training, or resources for your hydraulic hose assembly, contact the Gates customer service team.

    The product images shown are Illustrative only and may not be an exact representation of the product.

    CM2T Wire Braid Hose - EN 857 2SC - Dual Line

    Recommended for high abrasive high-pressure hydraulic oil lines that are joined together for easier plumbing and routing. High pressure and return lines such as boom arm and forklift applications. IMPORTANT: Gates recommends minimum split length of 250 mm depending on the application. Do not expose hose reinforcement when splitting hoses. Recommended Couplings: GlobalSpiral™ Couplings, MegaCrimp® Couplings.

    • CM2T - Twin hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids.
    • Superior flex impulse performance: Tested to 1,000,000 impulse cycles at 50% of EN 856 R12 and SAE 100R12 bend radii (except -32).

    All Parts

    Part # Product # Description Maximum Working Pressure (psi) Maximum Working Pressure (bar) Inside Diameter (in) Inside Diameter (mm) Outside Diameter (in) Outside Diameter (mm)

    Features and Benefits

    • With the Gates special XtraTuff® cover which offers 25 times the abrasion resistance of the standard CM2T cover as per ISO 6945.
    • Standards: Meets or exceeds the requirements of ISO 11237 2SC R16S. EN 857 2SC. SAE 100R16. ISO/DIS 1436.
    • CM2TDL-XTF hose has smaller exterior dimensions and significantly tighter bend radius.
    • No need to use clamps as the two lines are vulcanized together to form one single unit.
    • Meets Flame Resistance Acceptance Designation MSHA 2G.
    • 70% of EN 857 2SC bend radius at rated working pressure.
    • Superior flex impulse performance.
    • Validated with MegaCrimp®.
    • Temperature Range:
        • -40°C to +100°C
        • -40°F to +212°F
    • Size: 3/8" to 1/2".